Filter
Top Products
115
Explanation Section
<Selecting the Number of Display Digits> Page 42
Not required in the case of flicker measurement**.
1.Press the key to display the menu selection screen.
2.Press the key to open the number of display digits selec-
tion screen.
3.Press the key until the desired number of display digits
appears.
4FIGURES ←→ 3FIGURES
4. Press the key to confirm the selection.
Menu selection screen
Press the
key until the
desired number
of display digits
appears.
Number of display digits selection screen
<Selecting Probe No.> Page 43
1.Press the key to display the menu selection screen.
2.Press the key to open the PROBE selection screen.
3.Press the key until the desired probe no. appears.
The probe No. will be switched to the selected one
.
4. Press the key to confirm the selection.
Menu selection screen
Press the
key until the
desired probe
no. appears.
PROBE selection screen
When the optional 4-Probe Expansion Board CA-B15 is used
MENU : SELECT
PUSH SPACE KEY
SELECT : PROBE
P1 35881112 A
SELECT : PROBE
P3 35881113
MENU : SELECT
PUSH SPACE KEY
SELECT : DISP.
4 FIGURES
SELECT : DISP.
3 FIGURES
Measurement Preparation Pages 33 to 44
**Flicker Mode is a function which can be used only when LED Flicker Measuring ø27 Probe(CA-P32/35) or LED Flicker Measuring ø10
Probe(CA-PS32/35) is connected.
When the optional 4-Probe Expansion Board CA-B15 is used
In Flicker Mode with LED Flicker Measuring ø27 Probe(CA-P32/35) or LED Flicker Measuring ø10 Probe(CA-PS32/35) connected, a
selected probe cannot be changed to LED Universal Measuring ø27 Probe(CA-PU32/35) or LED Universal Measuring ø10 Probe(CA-
PSU32/35).