Filter
Top Products
4242
4. Selecting the Number of Display Digits
The number of display digits can be selected from 4 or 3.
However, T(correlated color temperature) is always displayed in three digits, and flicker is always displayed up to
the first decimal place.
[Selecting Method]
1.Press the key.
The LCD display will switch to the menu selection
screen.
2. Press the key to open the number of
display digits selection screen.
Each time the key is pressed, the screen will switch
in the order PROBE → SYNC → ID Name input →
RANGE → Measurement Speed → Number of Digits
→ Calibration standard→ RS232C Baud Rate →
PROBE.
3. Press the key until the desired number
of display digits appears.
Each time the key is pressed, the number of dis-
play digits switches alternately between “4 FIGURES”
and “3 FIGURES”.
4. Press the key to confirm the selection.
* By default (factory setting), the instrument is set so that “4 FIGURES”
will be selected automatically when the POWER switch is set to ON( | ).
* To cancel selection of the number of display digits, press
key.
<Notes on Number of Display Digits Setting>
● The selected number of display digits will be kept even if the POWER switch is set to OFF(●●).
The selected number of display digits will be effective when the POWER switch is set to ON( | ).
PQRS
7
TUV
8
WXYZ
MENU
ALPHA
9
GHI
4
JKL
5
MNO LOCK
6
CAL
White
1
ABC
2
DEF
-
SPACE
3
ENTER
Red
0
Green
.
Blue
1
2
3
4
Press the key until
the desired number of
display digits appears.
MENU : SELECT
PUSH SPACE KEY
SELECT : DISP.
4 FIGURES
SELECT : DISP.
3 FIGURES
Menu selection screen
Number of display digits
selection screen