Konica Minolta CA-310 CRT Television User Manual


 
1
Explanation Section
Safety Precautions
When using this hardware, the following points must be strictly observed to ensure correct and safe use.
After you have read this manual, keep it in a safe place so that it can be referred to easily whenever it is needed.
Do not use the CA-Series in places where flam-
mable or combustible gases (gasoline etc.) are
present. Doing so may cause a fire.
Always use the AC power cord supplied as a
standard accessory (for 100-120V
or for 200-
240V ) with the CA-Series, and connect it to
an AC outlet . Failure to do so may damage the
CA-Series, causing a fire or electric shock.
Securely insert the power plug as far as it will go.
If the plug is not fully inserted, fire or electric
shock may result.
Do not bend, twist or pull the AC power cord ex-
cessively. In addition, do not place heavy items
on the AC power cord, or damage or modify it in
any way. Doing so may cause damage to the AC
power cord, resulting in fire or electric shock.
If the CA-Series will not be used for a long time,
disconnect the AC power cord from the AC out-
let. Accumulated dirt or water on the prongs of
the AC power cord’s plug may cause a fire. If there
is any dirt or water on the prongs of the AC power
cord’s plug, remove it.
The CA-Series should not be operated if dirt or
dust has entered through the vent holes. Doing so
may result in a fire. For periodic inspection, con-
tact the nearest Konica Minolta authorized service
facility.
WARNING
(Failure to adhere to the following points may result in death or
serious injury.)
When disconnecting the AC power cord’s plug,
always hold the plug and pull it to remove it. Never
pull the AC power cord itself. Doing so may dam-
age the AC power cord, causing a fire or electric
shock. In addition, do not insert or disconnect the
AC power cord’s plug with wet hands. Doing so
may cause electric shock.
Do not disassemble or modify the CA-Series. Do-
ing so may cause a fire or electric shock.
Take special care not to allow liquid or metal ob-
jects to enter the CA-Series. Doing so may cause a
fire or electric shock. Should liquid or metal ob-
jects enter the CA-Series, turn the power OFF im-
mediately, disconnect the AC power cord from the
AC outlet, and contact the nearest Konica Minolta
authorized service facility.
The CA-Series should not be operated if it is dam-
aged, or smoke or odd smells are detected. Doing
so may result in a fire. In such situations, turn the
power OFF immediately, disconnect the AC power
cord from the AC outlet, and contact the nearest
Konica Minolta authorized service facility.
Take care not to drop or overturn the CA-Series.
Failure to adhere to this precaution may result in
injury or your body being trapped.
Do not place the instrument on an unstable or slop-
ing surface. Doing so may result in its dropping
or overturning, causing injury. Take care not to
drop the instrument when carrying it.
Do not block the vent. Doing so may cause fire.
CAUTION
(Failure to adhere to the following points may result in injury or
damage to the instrument or other property.)
Be sure to connect the AC power cord’s plug to an
AC outlet that has a protective grounding termi-
nal. Also make sure that peripheral devices (e.g.
PC) are connected to AC outlets that have a pro-
tective grounding terminal. Failure to do so may
result in electric shocks.
Unplug the power cord from the outlet before ser-
vicing the instrument. Failure to do so may cause
electric shock.