Filter
Top Products
45
Settings Section
Settings Section
This section explains settings that must be made according to
measurement mode.
The setting method varies with measurement mode.
From the Measurement Preparation Section
Outline of the Settings Section
Explains measurement method types and settings that must be made.
(Find out what settings you have to make.)
Before Making Each Setting
Gives detailed explanations on memory channels common to each setting and target colors.
To the Measurement section
When performing measurement
using Konica Minolta’s calibration
standard
Setting/Changing the Target
Color *1
Explains how to set/change the
target color.
1. Setting/Changing the Target
Color by Measurement
2. Setting/Changing the Target
Color by Entering Values
Page 62
User Calibration
Gives detailed explanation of user
calibration and explains its execu-
tion method.
(Target color is also set at this
time.)
Page 51
Analyzer Mode
Gives detailed explanation of ana-
lyzer mode and explains how to
input the RGB emission charac-
teristic for the display’s analyzer
mode.
(Target color is also set at this
time.)
Page 58
•To set an ID name:
“Setting an ID Name” (Page 67) *2
•To use the analog display function:
“Setting an Analog Display Range”
(Page 69) *3
When performing measurement
using user calibration
When performing measurement in
analyzer mode
•
To change the target color after user calibration
:
“Setting/Changing the Target Color”
(Page 60) *1
Other Settings
Explains how to set an ID name
and analog display range.
Page 67
Settings Checking Method
Explains how to check the set val-
ues and check the probe serial no.
used when the values are set.
Page 73
•To change the target color after the analyzer
mode RGB emission characteristic is input:
“Setting/Changing the Target Color” (Page
60) *1
Page 46
Page 48
Selecting the Calibration Stan-
dard
Select 6500K or 9300K.
Page 50