LG Electronics STB-3000 DVR User Manual


  Open as PDF
of 85
 
16
206-4272
EZ-Manager Wizard (Cont.)
Initiate Conguration or Exit the EZ-Manager Wizard
The Welcome screen provides a brief introduction to the EZ-Manager Wizard.
WELCOME TO LG’S EZ-MANAGER WIZARD
EXIT
NO PRO:CENTRIC
.
Use this setup wizard to configure the STB for Pro:Centric and/or Free-To-Guest (FTG) operation.
Select NEXT to continue.
.
If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to configure this STB for
FTG Mode, you may exit the wizard.
Select NO PRO:CENTRIC to disable the Pro:Centric feature of this STB, or select EXIT to quit.
This setup wizard will start automatically in 10 seconds.
NEXT
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the
rstcongurationstep.Oncethewizardhasproceeded,itisnotpossibletoreturntotheWelcome
screen; however, if you simply wish to exit the wizard, you can do so by selecting the “EXIT” option
from the subsequent screen(s).
From the Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select/
highlight NEXT and press OK. Then,continuetothe“STBCongurationOptions”sectiononthe
following page.
• To exit the wizard, but retain the use of the Pro:Centric remote management feature on this STB
(i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use the arrow keys on
the Installer Remote to select/highlight EXIT and press OK.Intheconrmationpop-upwindow,
select OK, and then press OK once more on the Installer Remote.
• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the
wizard’sZoningorUSBcongurationoptions,exitthewizardasfollows:Usethearrowkeys
on the Installer Remote to select/highlight NO PRO:CENTRIC and press OK. This will disable
the Pro:Centric feature of this STB (i.e., Installer Menu item 119 DATA CHANNEL will be set to
0)andexitthewizard.Intheconrmationpop-upwindow,selectOK, and then press OK once
more on the Installer Remote.
 previous next