LG Electronics STB-3000 DVR User Manual


  Open as PDF
of 85
 
23
206-4272
USB Conguration
The STB Manager / USB Download Menu provides options that enable you to download individual
congurationorsoftwarelestotheSTB,oryoucanusetheEzDownloadutilityavailablefromthe
menutoselectanddownloadmultiplecongurationorsoftwarelesatonetime.
Each of the STB Manager / USB Download Menu functions requires that you have the appropriate
le(s)loadedonaUSBmemorydevice.IfyouwishtoperformasoftwareupdatefromtheSTB
Manager / USB DownloadMenu,thesoftwareupdatele(s)mustbestoredinafoldernamed
“LG_DTV”intherootdirectoryoftheUSBmemorydevice.TLXlesshouldsimplybestoredinthe
root directory of the USB device.
Theprocedurebelowassumesthedesiredle(s)is/arealreadyloadedontotheUSBdevice.For
furtherinformationonSTBManager/USBDownloadMenufunctionsandlerequirements,and/
orforinformationoncreatingTLXles,refertotheappropriatesection(s)inthisdocument.
Before You Begin
• If you intend to use the Zoning feature(s) on this STB, make sure to assign the appropriate TV
Zone # and/or Wi-Fi Zone # in the EZ-Manager’s Zones, Label, and Room Number screen
BEFOREcontinuingwithUSBConguration.See“STBCongurationOptions”onpage17for
further information.
• Ensure the USB device to be used has been formatted with FAT format.
• Refer to “Ez Download Utility” on pages 25 to 28 for further information on the Ez Download utility.
• Refer to “Custom Master STB Setup” on pages 39 to 41 for information on creating a TLX file
for cloning purposes, and/or referto“CreatinganFTGCongurationFile”onpages48to49for
informationoncreatingaFTGConguration(.tlx)leforFTGModeconguration.
• See Reference section, “Updating STB Software using a USB Memory Device,” for further
information on software updates.
USB Conguration via EZ-Manager Wizard
WitheithertheSTBCongurationOptionsortheZones,Label,andRoomNumberscreenon
display,proceedasfollowstoconguretheSTB/displayusingtheUSBmemorydevice.
1. InserttheUSBmemorydevicethatcontainstheappropriatele(s)intoeither of the STB’s USB
ports.
EZ-Manager Wizard (Cont.)
(Continued from previous page)
WhenthePro:Centriccongurationiscomplete,anEZ-ManagerCongurationCompletescreen
(see example on page 20) is displayed, and after 10 seconds, the wizard exits, and the STB turns
OFF.
Note: WiththeEZ-ManagerCongurationComplete screen on display, you can also manually turn
off or reboot the STB. If desired, select TURN OFF or REBOOT, respectively, and then press OK on
the Installer Remote.
(Continued on next page)
 previous next