LG Electronics STB-3000 DVR User Manual


 
39
206-4272
Custom Master STB Setup
This section describes how to create a customized Master STB Setup for cloning purposes when
the STB is in Pass-through Mode. The Master STB Setup can used to configure either STBs that
are to remain in Pass-through Mode or STBs that are to be configured for FTG Mode.
Note: Cloning requirements and procedures are described in detail on pages 42 to 47.
Note: YoucanusetheFTGFileManagertocreateanFTGConguration(.tlx)leforFTGMode
conguration,ifdesired(seepages48to49).However,itisnotpossibletocustomizeSTBsetup
menu settings in the FTG File Manager. If you wish to include customized STB setup menu settings
intheSTBconguration,inadditiontothechannellineupandInstallerMenusettings,performthe
MasterSTBSetupproceduretocreatethecongurationle.
Before You Begin
• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel
Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.
• All Learning and Teaching processes on the STB are performed via USB memory device / TLX
le.TheTLXleformatclonesInstallerMenusettings,IPEnvironmentMenusettings(withthe
exception of unique STB attributes), and all STB sources’ (analog, digital, AV1, HDMI, etc.)
clonable setup menu settings. See also “Clonable STB Setup Menu Features” list below.
• IftheTLXlecontainsanFTGChannelMap(createdduringMasterSTBSetuporinFTGFile
Manager),theTargetSTB(s)willbeconguredforFTGModeafterTeachingisperformed,
though as part of the Teaching process, you may have the option to select either logical or physical
channeltuning.IfyouwishtoretainthedefaultPass-throughModeforallTargetSTBs,theTLXle
should not include an FTG Channel Map.
Clonable STB Setup Menu Features
Quick Settings
Channels
General
Language
Time & Date
Clock Mode (Auto/Manual)
Time Zone
Timers (No Signal Power Off)
Accessibility
Pointer Options
Closed Captions
Note: Some menu options vary between analog and digital channels and Aux inputs.