LG Electronics STB-3000 DVR User Manual


  Open as PDF
of 85
 
27
206-4272
Ez Download Utility (Cont.)
(Continued from previous page)
Note: IftherearenolesofaparticularletypeontheUSBdevice,thatletypeeldwillnot
be displayed in the Ez Download screen.Forexample,iftherearenoPTClesontheUSB
device,youwillnotseea“PTCSoftware”eldintheEzDownloadscreen.
Note: Press on the Installer Remote or select BACK, as necessary, to return to the
STB Manager / USB Download Menu. To exit the STB Manager, select CANCEL (if accessed
from the STB menus, you may also press EXIT on the Installer Remote to exit). If you accessed
the STB Manager via the EZ-Manager Wizard, you will be returned to the last screen on display
beforeyouselectedthe“USBConguration”option.IfyouaccessedtheSTBManagerviathe
STB menus, you will be returned to program viewing.
7. If more than one USB memory device is currently connected to the STB, be sure to select the
USBdevicethatcontainsthele(s)youwishtouse.Ifnecessary,usetheUp/Downarrow
keys on the Installer Remote to select/highlight the Select USB Memory Device eldand
press OK. Then, use the arrow keys to select the appropriate USB device from the drop-down
list.
8. ToselectaleusetheUp/DownarrowsontheInstallerRemotetoselect/highlightthe
appropriateletype/pull-downeld,andthenpressOK to view a drop-down list of available
les.Fromthedrop-downlist,usetheUp/Downarrowkeystoselectthedesiredle.
Note:Theutilitywillonlyallowyoutoselectoneofeachletypefordownloading.Forexample,
iftherearetwolesintheEzDownloadTeachToSTB(TLX)list,youcanonlyselectoneorthe
otherofthosetwoles.
Note:Theinitialdefaultvalueforeachletypeis “None.” After the Ez Download utility is run,
aleisautomaticallycreatedandstoredontheUSBdevicethatwasused.Thele,which
willhavea“.dzm”leextension,maintainsahistoryofthele(s) previously used with the Ez
Download utility. The next time(s) you use this USB device with the Ez Download utility, the
le(s)selectedforthelastdownloadwillbepre-selectedforthecurrentdownload.
Note:IfanSTBSoftware(CPU)leisselected,STBSWVersionandUpdateVersioneldswill
be displayedatthebottomrightofthescreen.Ensurethesoftwareversionoftheselectedleis
the correct version before applying the update to this STB.
9. IfaTLXlethatincludesanFTGChannelMapis selected, a Channel Tuning / Channel Banner
Displayeldwillbedisplayedattherightofthescreen.IftheFTGChannelMapcomprisesRF
channels and Aux inputs only (the latter designated by 130-0 through 137-0), you can choose
the format for the channel tuning/banner display. Use the arrow keys on the Installer Remote to
select Logical tuning or Physical tuning. A checkmark will appear at the left of the selected
option. Logical tuning is selected by default.
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if the
selectedTLXledoesnotincludeanFTGChannelMap,themessage,“NoChannelMapin
TLXle,”willbedisplayedattherightofthescreen.
10. When you are ready to continue, use the arrow keys on the Installer Remote to select UPDATE,
and then press OK.
(Continued on next page)
 previous next