Filter
Top Products
24
206-4272
EZ-Manager Wizard (Cont.)
(Continued from previous page)
2. Use the arrow keys on the Installer Remote to select USB CONFIGURATION, and then press
OK.
You will be redirected to the STB Manager / USB Download Menu (see example below).
CANCEL
STB MANAGER
USB Download Menu
Diagnostics Menu
Ez Download
Update STB Software
Update PTC Software
Teach To STB (TLX)
Note: You can select CANCEL and press OK on the Installer Remote at any time to return to
the EZ-Manager Wizard.
3. Select the appropriate option from the STB Manager / USB Download Menu, and complete the
download(s) as required.
Note: If you perform a software update, the STB will complete the update and then reboot. Upon
restart, the EZ-Manager STB Configuration Options screen will be displayed. If desired, you can
re-access the STB Manager / USB Download Menu (to perform additional functions), proceed
withcongurationviathewizard,orexitthewizard.
4. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are
resident on the STB.