LG Electronics STB-3000 DVR User Manual


 
69
206-4272
Reference: Using the STB’s Zoning Features (Cont.)
Note: While a channel can be restricted from up to eight Zones, an STB can only ever be in (set for) one
Zone. See also the FTG Channel Map Editor overview on page 52.
At the same time, keep in mind that the TV Zone designations are not mutually exclusive. That is, you may
opt to place Zone restrictions on selected channels in the FTG Channel Map, but at the same time, you
canchoosetocongureallSTBs/displaysatthesitewiththesameInstallerMenuand/orTVSetupMenu
settings.Forexample,anFTGConguration(.tlx)lebeingusedtoconguretheSTBs/displaysatasite
maycontainmultipleInstallerMenuandTVSetupMenuproleswithdifferentZoneassignments,aswell
as an FTG Channel Map with Zone restrictions on several channels. Each STB that still has the default TV
Zone 0 setting will onlybeconguredbytheInstallerMenuand/orTVSetupMenuprole(s)withaZone0
designation.If,ontheotherhand,theTVZone#issetto1,theSTBwillrstlookintheleforthe STB-3000
InstallerMenuand/orTVSetupMenuprole(s)withaZone1designation.IfnoneoftheSTB-3000Installer
Menuand/orTVSetupMenuproleshasaZone1designation,theSTBwillthenlookfortheSTB-3000
prole(s)withaZone0designation.FortheFTGChannelMapconguration,whentheTVZone#issetto
0, the STB will ignore any Zone restrictions (1–8) that may be placed on channels in the FTG Channel Map.
However, when the TV Zone # is set to 1, the STB will omit any channels that have been restricted from
Zone 1 in the FTG Channel Map.
Using the TV Zoning Feature with Cloning Conguration
Alocation-specicconguration/TLXlemaybesaved(Learned)fromanindividualSTBaspartofa
Master STB Setup and then be used during Teaching. For example, if the TV Zone # in the Master STB is
setto3beforeLearningisinitiated,theMasterSTB’sInstallerMenuandTVSetupMenuproleswillbe
savedwiththeTVZone3assignmentwhenLearningiscompleted.InordertoconguretheTargetSTBs
withtheZone3InstallerMenuandTVSetupMenuprolesLearnedfromtheMasterSTB,youmustsetthe
TV Zone # accordingly in the Target STBs before transferring (Teaching) the Master STB Setup. See “Set
the TV Zone # and/or Wi-Fi Zone # in the STB” on the following page. Also, see “Cloning Procedures” on
pages 42 to 47 for additional information on the cloning processes. TV Zone 0 is the default TV Zone #.
Wi-Fi Zoning Feature
TheWi-FiZoningfeatureenablesyoutouseaTLXletocongureanindividualSTBorgroupofSTBs
with a particular Wi-Fi access point’s login data to create “Wi-Fi Zones” within the installation environment.
Using the Wi-Fi Zoning Feature with FTG Mode Conguration
TheFTGFileManagermaybeusedtocreateanFTGConguration(.tlx)lewithanFTGInstallerMenu
prolethatcontainslogindataformultipleWi-Fiaccesspoints,eachassignedaWi-FiZone#.Up to 100
Wi-Fi Zones can be designated withineachFTGInstallerMenuprole,thusallowingfordistributionofthe
Wi-Fi network load. For example, if a site has 50 STB-3000s within close proximity, you may wish to create
10Wi-FiZones,eachwithitsownaccesspointthathasuniquelogindata,sothatnomorethanveofthe
STBs are connected to one access point at any given time.
InorderforanSTBtobeconguredbytheproperInstallerMenuprolewiththedesiredWi-Fiaccesspoint
login data for wireless networking (i.e., SSID, security type, and security key), you must set both the TV Zone
# and the Wi-Fi Zone # in the STB (see “Set the TV Zone # and/or Wi-Fi Zone # in the STB” on the following
page for further information). If the Wi-Fi Zone # in the STB is set to 0 (default), the STB will not obtain
accesspointlogindatafromtheInstallerMenuprolewithwhichitisconguredunlesstheprolecontains
theglobalWi-FiZone100.Similarly,anySTBthatdoesnotnditsmatchingWi-FiZone#intheTLXle,but
thatdoesndtheglobalWi-FiZone100,willbeconguredwiththeglobalaccesspointlogindata.
Refer to the Free-To-Guest (FTG) File Manager User GuideforfurtherinformationondeningWi-Fi
Zones in the FTG File Manager.