LG Electronics STB-3000 DVR User Manual


  Open as PDF
of 85
 
20
206-4272
EZ-Manager Wizard (Cont.)
(Continued from previous page)
If the process is successful, no further user interaction is required, though, in some instances, where
the option (for example “NEXT”) is available, you may manually move forward to subsequent steps
within the wizard to speed up the process.
PROCESSING THE PRO:CENTRIC CONFIGURATION
Downloading the Pro:Centric application files takes a few minutes.
Please wait...
2%
Retrieving files from data channel 70
Application files In progress...
Maintenance Files Synchronizing...
Warning - Do not remove AC power or the signal cables during these steps.
03
Note: If,aftercompletingthesearch,theSTBisunabletondthePro:Centricdatachannel(while
the Searching for Pro:Centric Server screen is on display), the wizard will stop and show a
Diagnostics screen that enables you to manually return to the previous screen (to reinitiate the
conguration)orexitthewizard.
WhenthePro:CentricCongurationiscomplete,anEZ-ManagerCongurationCompletescreenis
displayed (see example below), and after 10 seconds, the wizard exits, and the STB turns OFF.
Installed Components
Pro:Centric Application GEM application downloaded
Maintenance Files LY970H_Config.tlx
TURN OFF
REBOOT
EZ-MANAGER CONFIGURATION COMPLETE
STB will turn o in 10 second(s)
Installed Components
Pro:Centric Application GEM application downloaded
Maintenance Files STB-3000_Config.tlx
TURN OFF
REBOOT
04
Note: WiththeEZ-ManagerCongurationCompletescreenon display, you can also manually turn
off or reboot the STB. If desired, select TURN OFF or REBOOT, respectively, and then press OK
on the Installer Remote.
 previous next