LG Electronics STB-3000 DVR User Manual


  Open as PDF
of 85
 
56
206-4272
IP Environment Setup (Cont.)
(Continued from previous page)
Pro:Centric Application Mode Conguration
Select/highlight the Modeeldandand press OK on the Installer Remote to display the
drop-down list of options. Then, use the Up/Down arrow keys to select the appropriate
Pro:Centric Application Mode setting—Conguration Only, FLASH, GEM, or HTML. If the
Pro:CentricApplicationModeissetto“CongurationOnly,”Pro:Centricapplicationdatawill
not be downloaded.
Note: If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in the
EZ-ManagerWizard,thespeciedmodewillbereectedinthiseld.Ifyouchangethemodein
thismenu,InstallerMenuitem098willnowreectthevalueyouselectedhere.
3. Select/specify the appropriate Update Event setting(s), as required. Based on Update Time
settings, the Wake For Update feature wakes the STB once daily to check for, and if applicable,
download updates from the Pro:Centric server. See Installer Menu item 121 UPDATE TIME HR
description on page 38 for additional information on Wake For Update functionality.
• To toggle between ON and OFF in this menu, select/highlight the Update Eventeldand
press OKontheInstallerRemote.WhenUpdateEventissetto“ON,”anUpdateTimeeld
is displayed on the screen.
• If Update Event is ON, set the Update Time as required. Use the arrow keys on the Installer
Remotetoselect/highlighttheUpdateTimeeld,andthenpressOK. Hour, Minute, and
Meridiemeldswillbedisplayed.Selecteacheldinturnand specify the appropriate Wake
For Update time, as desired. Note that the Update Time set in this menu is based on a 12-hour
clock.Ensurethemeridiem(AM/PM)specicationissetaccordingly.
4. Oncealleldsarecompletedasrequired,usethearrowkeysontheInstallerRemotetoreturnto
the IP Environment Menu, as necessary, or press to exit the IP Environment Menu.
Network Conguration
This section describes each of the options available in the Network
Menu (see example at right). Refer to the appropriate subsection(s)
on the following pages.
Note: If you intend to use the Wi-Fi Zoning feature with
cloning conguration, you must congure the wireless
network connection as part of the Master STB Setup.
See “Conguring a Wi-Fi Network Connection” on page
58 for further information.
Accessing the Network Menu
With the IP Environment Menu on display, use the arrow keys on
the Installer Remote to select the Network menu option. Then,
press OK.
Note: The STB’s MAC address is displayed at the top of the Network
Menuscreenandcannotbemodied.
MAC Address AA:45:F7:52:F8:0F
Network Setting
IP Stream Control
Wake On LAN
Media Share
NETWORK
Pro:Centric
Network
Pre-loaded Apps
 previous next