Pelco DX7100 DVR User Manual


 
20 C642M (11/03)
PASSWORD SETUP
DX7100 has four levels of password protection to prevent unauthorized changes or use of the system. The following are the
four password levels:
Server Administrator Set the password to access the Setup mode.
Search User Set the password to access the Search mode.
PTZ/Backup User Set the password the access the PTZ and Copy modes.
Connection User Set the password to access the system using the DX7100RX remote site software.
When a password is set, it will be requested before a user can access that mode. If there is no password, any user can access
that mode.
Figure 9. Password Setup Menu
1 SELECT LEVEL – Select a password level.
2 Password – View password. The actual password does not appear, only asterisks.
3 Number Buttons – Use number buttons to enter password. Enter up to 12 numbers.
4 ENTER Button – Saves password. If you are entering passwords for more than one level, click the button before moving
to another level.
5 CLEAR Button – Clears password. After clicking CLEAR, click ENTER.
3
5
2
4
1