Pelco DX7100 DVR User Manual


 
C642M (11/03) 5
GETTING STARTED
You will need to install your unit before using this manual. Refer to the installation manual supplied with the
DX7100.
Once the system is installed, open the front door of the DVR and press the power switch. If, during the initial start-up, you are
asked to configure part of your system, follow the on-screen instructions. After the system starts up, the main screen (DISPLAY
mode) appears on the monitor (refer to Figure 1).
Refer to the following pages to learn how to operate and program your DX7100 Series digital video recorder.