Pelco DX7100 DVR User Manual


 
C642M (11/03) 41
PRESETS
A preset is a user-defined camera position using pan, tilt, zoom, and focus commands. The DX7100 Series DVR has programming
capacity for 12 preset locations.
NOTE: The selected camera is indicated by the number displayed in the center of the PTZ controls. Refer to Figure 23.
How to Move to a Preset
1. Click the PTZ button in the ON LINE mode. The PTZ mode appears.
2. Click PRESET. The preset bar appears (refer to Figure 25).
3. Select a camera by moving the mouse pointer to the desired camera view and clicking the left mouse button. The
selected camera number is displayed in the center of the PTZ controls.
4. Click MOVE. ON appears on the button.
5. Click a preset button 1-12. The camera moves to the programmed preset position.
6. Click MOVE to turn off preset positioning.
NOTE: Presets cannot be programmed with the remote site software.