Pelco DX7100 DVR User Manual


 
52 C642M (11/03)
6 EXIT Button – Exits Backup Viewer.
7 Playback Buttons
8 Close CD Tray Button – Closes CD tray. Playback must be stopped before button can be used. This button does not appear
if you are viewing data from a hard drive.
9 Open CD Tray Button – Opens CD tray. Playback must be stopped before button can be used. This button does not appear
if you are viewing data from a hard drive.
10 AVI Button – Creates and saves an AVI file to a selected drive. Playback must be stopped before button can be used.
Refer to the
AVI Backup
section.
11 Print Button – Prints image. Playback must be stopped before button can be used.
12 FDD Button – Saves recorded image to a 3.5-inch diskette. Playback must be stopped before button can be used.
13 Zoom/Contrast/Brightness Buttons – Adjust levels for recorded image. Use with single display playback only.
14 Camera Button – Displays camera buttons.
Info Button – Displays the amount of data on the selected drive.
Slider Button – Displays slider bars.
15 Camera Buttons – Select cameras to view. The default setting of the DX7100 turns all cameras on. If you do not want to
view all cameras, click a button to turn a camera off.
16 Screen Division Buttons – Select single-camera or multiple-camera views. To select a single camera, click the button on
the far right (X). This turns off all cameras. Then select the desired camera. A single camera must be selected before you
can use the AVI, print, or FDD buttons.