Pelco DX7100 DVR User Manual


 
C642M (11/03) 31
INDEX SEARCH
1 Click the INDEX SEARCH button. A blank Index List (3) appears.
2 Select the year, month, and day.
3 Select the event type (motion or sensor) to search.
Enter the START TIME and END TIME of search.
In the fall when there is a change from daylight time to regular time, there will be two hours of recording between 1 A.M.
and 2 A.M., one hour before the time change and one hour after the time change. The Daylight Time checkbox can be used
only on day of the time change. To view the hour before the time change, make sure the Daylight Time checkbox is not
selected. To view the hour after the time change, click the Daylight Time checkbox to select it.
4 Click the Camera button if the camera buttons are not shown in the lower-left corner of the screen.
5 Select a camera to view. Only one camera can be searched at a time.
Depending on the amount of data it may take several minutes before an Index List is displayed. Double-click one of the
data files to display the recording.
6 Use the playback buttons to review a recording.
1
2
6
54
3
Figure 17. Index Search