Pelco DX7100 DVR User Manual


 
C642M (11/03) 35
Figure 21. Setup Screen
1 Date and Time Indicator – Displays current date and time on the local machine.
2 CLIENT ADMIN PASSWORD Box — Enter the Administrator password. The first time the remote site software is used,
the system administrator should enter a password to prevent unauthorized access to this screen. Entering a password
also controls access to the remote site; that is, the user will be asked for the password when he presses the CONNECT
button (refer to
Remote Software Operation).
NOTE: You must have Windows Administrator privileges to access setup page.
3 SWITCH SPEED Slider Bar – Set the sequencing time between cameras for the remote site.
4 USE BEEP Selection Box and Slider Bar – Click the checkbox to be alerted when motion is detected. Use the slider bar
to set the duration of the beep.
5 OVERLAY MODE Box – Click the arrow to open a drop-down menu. Select NON-OVERLAY mode if your computer is
using Windows NT or if your PC video card does not support multiple layers.
6 SITE NAME Box – Enter the name of the site.
1
14
15
2 3 4 5
1
2
6
7
8
9
10
11
13
REGISTERED SITE SETUP