Filter
Top Products
24 C642M (11/03)
PTZ CONTROLS
To operate pan/tilt/zoom functions on controllable systems, do the following:
1. Select a camera.
a. Move the mouse pointer to a camera view. Click the left mouse button. A green box appears around the
view. The camera number (1 through 16) appears in the center of the pan and tilt control (refer to Figure 12).
b. If you want a large-screen image, click the camera view again.
2. Use the left and right arrow buttons to pan left and right.
3. Use the up and down arrow buttons to tilt up and down.
4. Use the FOCUS settings (+/-) to obtain the sharpest picture.
5. Use the ZOOM settings (+/-) to zoom near or far.
6. Use the SPEED settings (+/-) to increase or decrease the pan and tilt speeds. There are five speeds.
Figure 12. PTZ Controls
DOWN
CAMERA
RIGHTLEFT
UP