Filter
Top Products
MAIN FEATURES
This digital video recorder can be used to store images recorded by a
monitoring camera onto its built-in hard disk.
This digital video recorder can display images that are being recorded
by a camera in a split-screen (16, 9, 4), and it can also display images
that have already been recorded in a split-screen.
The DSR-3009P model split-screen display is capable of 4-screen or
9-screen displays only.
•
Equipped with a large-capacity 3.5-inch hard disk drive allowing
recording and playback from the built-in hard disk
•
Playback can be carried out at the same time as recording.
•
Alarm recording tracks movements of suspicious individuals.
•
Timer recording lets you record different sessions each day.
•
Pre-alarm recording records the images immediately before an
alarm.
•
Audio recording and playback are also possible.
•
Recorded images can be copied using CompactFlash cards.
•
Includes a variety of search functions.
☞ Alarm searching using an alarm event list or thumbnail alarm
images
☞ Time and date searches based on recording date and time
☞ Motion sensor detecting by searching for the movement of a
suspicious individual
•
A zoom function allows images being monitored and played back
to be enlarged for display.
•
The image quality mode can be selected from five modes.
•
High-speed switching for each field at maximum speed
•
Single-screen, 4-screen, 9-screen and 16-screen display, camera
images and video playback images can be displayed in the
lower-right corner of the screen, and automatic switching is also
possible.
•
A single-screen can be displayed during spot monitoring and the
alarm screen can be displayed when an alarm occurs.
•
Timer setting allows the following settings to be made for each
camera.
☞ The monitor mask function allows images from selected
cameras to be covered by gray patterns during certain time
periods.
☞
Automatic switching of camera images selected by timer period
☞ Setting of automatic screen switching speed for each camera
for four different daily time zones.
•
A monitor masking function hides the images for specified
cameras with gray patterns so that they cannot be monitored.
•
Motion sensor detection is possible for each camera. Moving
objects can be given recording priority and alarm operation is
possible.
•
If a signal loss is detected, the monitor screen image can be
replaced by a test pattern or a still image, even if the camera
image has been lost as a result of the interruption.
•
Two levels of security lock are available.
•
A PC card-type network card (recommended) can be used to carry
out network control.
•
Includes an RS-232C interface for computer control.
•
Connection to a system controller (sold separately) is possible
using an RS-485 interface.
•
A PC card-type SCSI card can be used for backups to DDS (DAT)
drives.
•
A PC card-type SCSI card can be used to copy data to YAMAHA
CD-R drives.
•
Equipped with MONITOR OUT 2 and S-Video signal input and
output connectors.
•
Connection to digital equipment such as a digital video recorder
(sold separately) is possible using digital connectors.
Setting-up environment
Leave a space of at least 5 cm between the digital video recorder and
other nearby objects.
Ventilation holes are located at both sides and on the base of the
digital video recorder. Do not allow these ventilation holes to be
covered when setting up the recorder.
Furthermore, avoid using the digital video recorder in places with poor
ventilation.
English
3