Filter
Top Products
RECORDING SETTING
Pre-alarm recording setting
1
Use the jog dial to move the cursor to ALARM RECORDING,
and then turn the shuttle dial clockwise.
“OFF” flashes.
2
Use the jog dial to change the “OFF” setting to some other
mode (example: ENABLED), and then turn the shuttle dial
clockwise.
The PRE-ALARM RECORDING setting changes from “ ” to
“OFF”.
The cursor moves to REC RATE.
3
Use the jog dial to move the cursor to PRE-ALARM
RECORDING, and then turn the shuttle dial clockwise.
“OFF” flashes.
4
Use the jog dial to change from “OFF” to “ON” , and then turn
the shuttle dial clockwise.
The cursor moves to REC RATE.
5
Turn the shuttle dial clockwise, use the jog dial to set the
recording speed, and then turn the shuttle dial clockwise.
The cursor moves to the “2SEC” setting for DURATION and
flashes.
6
Use the jog dial to set the recording time duration (example:
“5SEC” ), and then turn the shuttle dial clockwise.
The cursor moves to ALARM TRIGGER.
7
Use the jog dial to move the cursor to PROGRAM GROUP,
turn the shuttle dial clockwise, use the jog dial to set the
program number (example: “P-1"), and then turn the shuttle
dial clockwise.
The cursor moves to REC RATE.
Display examples:
•
OFF: Pre-alarm images from all cameras are recorded at the
same recording speed.
•
P-1: When program no. 1 is recorded
•
P-2: When program no. 2 is recorded
•
P-3: When program no. 3 is recorded
•
P-4: When program no. 4 is recorded
Note: When pre-alarm recording has been set, the pre-alarm
recording speed and the recording speed for normal recording
will be fixed at 15 FPS. A warning screen appears to verify
confirm this, so select “YES”.
8
Press the EXIT/OSD button.
The display returns to the normal screen.
“PRE” appears in the operating display section. When an alarm is
triggered, the display switches to “ALARM”.
Note:
•
Pre-alarm recording continues for the length of time specified by
the DURATION setting before an alarm signal is input. When
playing back images that have been recorded during pre-alarm
recording, use the alarm search (SEARCH button) operations.
Images will be played back from the point that the alarm occurred,
so use the shuttle operations to carry out rewind playback.
•
If carrying out normal alarm recording and pre-alarm recording at
the same time, no audio signals will be recorded with the
pre-alarm recording images.
<ALARM REC MODE SET>
PICTURE QUALITY : SUPER FINE
AUDIO RECORDING : ON
ALARM RECORDING : ENABLED
ALARM INTERLEAVE : SW
PROGRAM GROUP : OFF
REC RATE: @ 8.33FPS, DURATION: 5SEC
PRE-ALARM RECORDING : ON
REC RATE: @ **** FPS, DURATION: ***
=> (01010 ALARMS CAN BE RECORDED )
ALARM TRIGGER : ALARM
CO G
ALARM INTERLEAVE : ONLY
PROGRAM GROUP : OFF
REC RATE: @ 8.33FPS, DURATION: 40SEC
PRE-ALARM RECORDING : ON
REC RATE: @ **** FPS, DURATION: ***
=> (01010 ALARMS CAN BE RECORDED )
ALARM TRIGGER : ALARM
ALARM
RECORDING
:
ENABLED
ALARM INTERLEAVE : ONLY
PROGRAM GROUP : OFF
REC RATE: @ 8.33FPS, DURATION: 5SEC
PRE-ALARM RECORDING : ON
REC RATE: @ 12.5FPS, DURATION: 5
=> (01010 ALARMS CAN BE RECORDED )
ALARM TRIGGER : ALARM
EXIT/OSD
01
PRE 0000 SF 01-01-02 06:46:15
62
English