Filter
Top Products
RECORDING SETTING
A
SW1
Recording alternates between images from the cameras where an alarm has occurred and images from all cameras that are connected. If
alarms have occurred at more than one camera, images from the cameras where an alarm has occurred and images from all cameras are
alternately recorded one image at a time.
•
Recording pattern if an alarm occurs at camera 2
Note: If PROGRAM GROUP as been specified, the images from the cameras that are set to “ON” on that program will be recorded
alternately.
•
Recording pattern if alarms occur at two or more cameras (example: cameras 2 and 4)
B
ONLY
Only images from the camera where the alarm is detected are recorded. If more than one alarm has been detected, the alarm images are
recorded alternately.
•
Recording pattern if an alarm occurs at camera 2
•
Recording pattern if alarms occur at two or more cameras (example: cameras 2 and 4)
Camera 2 alarm Alarm canceled
Alarm camera images and images from all cameras are
recorded alternately
Camera 2 alarm Camera 4 alarm Camera 2 alarm canceled
Camera 2 and camera 4 alarm images are recorded alternately
Camera 4 alarm canceled
Alarm image recording
Camera 2 alarm Alarm canceled
Recording of camera 2
alarm images
Camera 2 alarm Camera 4 alarm Camera 2 alarm canceled
Camera 4 alarm
canceled
When 2 or more alarms occur,
alarm images are recorded
alternately
English
61