Filter
Top Products
RECORDING SETTING
D
PROGRAM REC SET menu
Recording for particular cameras only can be carried out by specifying
those cameras. Programs from no. 1 to no. 4 can be set. For
example, program no. 1 could be set to record images from cameras
1 to 4 only, and program no. 2 could be set to record images from
cameras 3 to 9. In addition, these programs can be used during timer
recording and pre-alarm recording also.
Display examples:
To set program no. 1 to record only images from cameras 1 to 3
1
P-1
Select a program number from 1 to 4.
2
SELECT INDIVIDUAL CAMERA RATE (FPS)
Select the cameras to be recorded from the connected cameras 1
to 16). The recording speed can also be set for each camera.
(PROGRAM REC RECORDING RATE see page 90.)
Note: The maximum speed for program recording is 25 FPS. The
maximum speed for each camera is 25 FPS divided by the
number of cameras that are set to “ON”. For example, if 10
cameras have been set to “ON”, the maximum speed for each
camera will be 2.5 FPS.
Example: To set program no. 1 to record only
images from cameras 1, 2 and 3
For the DSR-3009P model, you can select cameras from 1 to 9.
1
Press the MENU button to select RECORD SET, and then turn
the shuttle dial clockwise.
The RECORD SET sub-menu appears, and the cursor is
positioned at RECORDING AREA SET.
2
Use the jog dial to move the cursor to PROGRAM REC SET,
and then turn the shuttle dial clockwise.
The PROGRAM REC SET sub-menu appears, and the cursor is
positioned at P-1.
3
Turn the shuttle dial clockwise, use the jog dial to set the
program number (example: P-1), and then turn the shuttle dial
clockwise.
The cursor moves to 01.
4
Turn the shuttle dial clockwise.
“0.313” (camera number) flashes.
5
Turn the shuttle dial clockwise, use the jog dial to set the
recording speed (example: 0.521), and then turn the shuttle
dial clockwise.
Camera 1 will record at a speed of 0.521. The cursor then moves
to “02”.
6
Repeat the above procedure to set the recording speeds for
cameras 2 and 3.
7
With the cursor at “04” (camera number), use the jog dial to
change the setting to “OFF” , and then turn the shuttle dial
clockwise.
Images from camera 4 will not be recorded.
8
Repeat the above procedure to set cameras 5 to 16 to “OFF” .
9
Repeat the above procedure to make settings for other
program numbers (2 to 4).
10
Press the EXIT/OSD button.
The display returns to the normal screen.
<PROGRAM REC SET>
P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01:1.563 02:1.563 03:0.781 04:1.563
05:1.563 06:1.563 07:0.521 08:0.313
09:1.563 10:0.781 11:0.313 12:0.781
13:OFF 14:OFF 15:OFF 16:OFF
NORMAL REC: 23H
ALARM REC : 01360
Only images (1 – 3) from selected
cameras are recorded
1
2
MENU
<PROGRAM REC SET>
P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01:0.313 02:0.313 03:0.313 04:0.313
05:0.313 06:0.313 07:0.313 08:0.313
09:0.313 10:0.313 11:0.313 12:0.313
13:0.313 14:0.313 15:0.313 16:0.313
NORMAL REC: 23H
ALARM REC : 01360
<PROGRAM REC SET>
P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01:0.313 02:0.313 03:0.313 04:0.313
05:0.313 06:0.313 07:0.313 08:0.313
09:0.313 10:0.313 11:0.313 12:0.313
13:0.313 14:0.313 15:0.313 16:0.313
<PROGRAM REC SET>
P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01:0.521 02:0.521 03:0.781 04:0.781
05:OFF 06:OFF 07:OFF 08:OFF
09:OFF 10:OFF 11:OFF 12:OFF
13:OFF 14:OFF 15:OFF 16:OFF
NORMAL REC: 23H
ALARM REC : 01360
EXIT/OSD
English
55