Filter
Top Products
RECORDING SETTING
Alarm display settings
1
Press the MENU button to select RECORD SET, and then turn
the shuttle dial clockwise.
The RECORD SET sub-menu appears, and the cursor is
positioned at RECORDING AREA SET.
2
Use the jog dial to move the cursor to ALARM OPERATION
SET, and then turn the shuttle dial clockwise.
The ALARM OPERATION SET sub-menu appears, and the cursor
is positioned at MAIN MON. DISPLAY.
3
Turn the shuttle dial clockwise.
“FULL” flashes.
Display examples:
•
FULL: When an alarm is detected, images from the channel
that received the alarm are displayed on the main monitor as a
single screen.
•
16: When an alarm is detected, images are displayed in a
16-screen display.
•
9: When an alarm is detected, images are displayed on the
main monitor in a 9-screen display.
•
NC: The main monitor display does not change when an alarm
is detected.
4
Use the jog dial to select the display mode (example: 9), and
then turn the shuttle dial clockwise.
The cursor moves to ALARM PRIORITY.
5
Turn the shuttle dial clockwise, use the jog dial to select the
ALARM PRIORITY setting (example: FIRST), and then turn the
shuttle dial clockwise.
The cursor moves to MON.2 DISPLAY.
Display examples:
•
LAST: When more than one alarm is detected at the same
time, the alarms are given priority starting from the last alarm
received.
•
FIRST: When more than one alarm is detected at the same
time, only the first alarm received is displayed, and images for
subsequent alarms are not displayed.
•
SWITCH: When more than one alarm is detected at the same
time, the alarm images for each alarm are displayed alternately
at 1-second intervals.
6
Use the jog dial to select the MON.2 DISPLAY setting
(example: OFF), and then turn the shuttle dial clockwise.
The cursor moves to RETRIGGER.
Display examples:
•
ON: When an alarm is detected, the alarm images are
displayed on monitor 2.
•
OFF: Alarm images are not displayed on monitor 2.
7
Turn the shuttle dial clockwise, use the jog dial to change the
RETRIGGER setting (example: ON), and then turn the shuttle
dial clockwise.
The cursor moves to MOTION SENSOR.
Display examples:
•
ON: The duration of alarm recording is extended if an alarm is
received from the same channel for which alarm recording is
currently in operation.
•
OFF: The alarm duration is not extended even if another alarm
is received from the same channel.
8
Press the EXIT/OSD button.
The display returns to the normal screen.
MENU
<ALARM OPERATION SET>
MAIN MON. DISPLAY : FULL
ALARM PRIORITY : LAST
MON.2 DISPLAY : OFF
RETRIGGER : OFF
MOTION SENSOR ->
ALARM DURATION SET ->
<ALARM OPERATION SET>
MAIN MON. DISPLAY : FULL
ALARM PRIORITY : LAST
MON.2 DISPLAY : OFF
RETRIGGER : OFF
MOTION SENSOR ->
<ALARM OPERATION SET>
MAIN MON. DISPLAY : 9
ALARM PRIORITY : FIRST
MON.2 DISPLAY : OFF
RETRIGGER : OFF
MOTION SENSOR ->
<ALARM OPERATION SET>
MAIN MON. DISPLAY : 9
ALARM PRIORITY : FIRST
MON.2 DISPLAY : OFF
RETRIGGER : OFF
MOTION SENSOR ->
ALARM DURATION SET ->
EXIT/OSD
66
English