Sanyo DSR-3009P DVR User Manual


 
RECORDING SETTING
<ALARM OPERATION SET>
MAIN MON. DISPLAY : FULL
ALARM PRIORITY : LAST
MON.2 DISPLAY : OFF
RETRIGGER : OFF
MOTION SENSOR ->
ALARM DURATION SET ->
<ALARM REC MODE SET>
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM RECORDING : OFF
ALARM INTERLEAVE : ONLY
PROGRAM GROUP : OFF
REC RATE: @ 25FPS, DURATION: 5SEC
PRE-ALARM RECORDING : ¤¤¤
REC RATE: **** FPS, DURATION: ***
=> (07733 ALARMS CAN BE RECORDED )
ALARM TRIGGER : ALARM
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 25FPS OFF
MON --:-- --:-- OFF 25FPS OFF
THE --:-- --:-- OFF 25FPS OFF
WED --:-- --:-- OFF 25FPS OFF
THU --:-- --:-- OFF 25FPS OFF
FRI --:-- --:-- OFF 25FPS OFF
SAT --:-- --:-- OFF 25FPS OFF
DLY --:-- --:-- OFF 25FPS OFF
<PROGRAM REC SET>
P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01:0.313 02:0.313 03:0.313 04:0.313
05:0.313 06:0.313 07:0.313 08:0.313
09:0.313 10:0.313 11:0.313 12:0.313
13:0.313 14:0.313 15:0.313 16:0.313
NORMAL REC: 23H
ALARM REC : 01360
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
REC RATE : 25FPS ( 18H)
REC RPOGRAM GROUP : OFF
<RECORDING CONDITIONS SET>
DIGITAL SERIES RECORDING : OFF
TOTAL NUMBER : 1
NORMAL RECORDING AREA
OVERWRITE : OFF
ALARM RECORDING AREA
OVERWRITE : OFF
REMAINING DISK WARNING : 1 %
<RECORDING AREA SET>
TOTAL CAPACITY : 80GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
5.POWER FAILURE/USED TIME ->
6.COPY MENU SETTINGS ->
MOVE LINES WITH JOG, SELECT WITH SHUTTLE
<RECORD SET>
1.RECORDING AREA SET ->
2.RECORDING CONDITIONS SET ->
3.NORMAL REC MODE SET ->
4.PROGRAM REC SET ->
5.TIMER SET ->
6.ALARM REC MODE SET ->
7.ALARM OPERATION SET ->
MOVE LINES WITH JOG, SELECT WITH SHUTTLE
Changes the alarm settings for detecting
suspicious people, and also changes motion
sensor settings.
Changes the timer settings.
You must always set the timer when carrying
out timer recording.
Changes the program recording settings.
Programs no. 1 to no. 4 can be set, and
recording can then be carried out simply by
specifying the camera for recording. The
recording period can be changed separately for
each camera.
Changes the settings for connections when
more than one (maximum of 2) digital video
recorder is connected together for series
recording.
Changes the overwriting setting for the normal
recording area.
Changes the overwriting setting for the alarm
recording area.
Changes the warning settings for the remaining
recording area.
Changes the recording cycle (recording speed)
settings.
Values in brackets are available recording
times.
Changes the image quality settings.
Specifies the program numbers for program
recording.
Changes the audio recording settings.
Changes the settings for alarm recording and
pre-alarm recording.
Main manu
Normal
recording
area
Displays the total
capacity of the hard
disk.
Sets the capacity of the
normal recording area.
Sets the capacity of the
alarm recording area.
Archive
recording
area
Sets the capacity of the
archive recording area.
Alarm
recording
area
RECORDING AREA SET
menu
A
RECORDING
CONDITIONS SET menu
B
NORMAL REC MODE SET
menu
C
PROGRAM REC SET
menu
D
TIMER SET menu
E
ALARM REC MODE SET menu
F
ALARM OPERATION SET menu
G
50
English