Filter
Top Products
MENU-SPECIFIC SETTINGS2
English 103
(when optional interface board is installed)
Set conditions for normal recording and timer recording as
described below.
Set the picture quality for recording to the normal recording
area as follows.
1 Select “PICTURE QUALITY”.
[Settings] ( indicates default setting.)
2 Select “FRAME” or “FIELD” recording.
[Settings] ( indicates default setting.)
Audio can be recorded together with images when
performing normal recording.
Note, however, that since this audio data will also be
stored in the normal recording area, the recording time for
this area will be reduced.
3 Select “AUDIO RECORDING”.
[Settings] ( indicates default setting.)
z Audio recording can only be specified when the
recording rate is more than A 5.00/10.00 FPS.
Set the recording rate for normal recording as follows.
(Default setting: A 5.00/10.00 FPS)
4 Select the recording rate for normal
recording.
A 30.00/60.00, A 15.00/30.00, A 10.00/20.00, A 7.50/15.00,
A 5.00/10.00, 3.75/7.50, 3.00/6.00, 2.50/5.00, 2.14/4.29,
1.88/3.75, 1.67/3.33, 1.50/3.00, 1.36/2.73, 1.15/2.31,
1.00/2.00, 0.83/1.67, 0.71/1.43, 0.63/1.25, 0.56/1.11,
0.50/1.00, 0.25/0.50, 0.17/0.33, 0.13/0.25, 0.10/0.20,
0.05/0.10, 0.03/0.05, 0.02/0.03 (Unit: FPS)
Selecting setting values
Image resolution is determined by the product of picture
quality and recording rate. The higher the picture quality
and the faster the recording rate, the better the image
resolution; however, as higher resolution requires more
storage capacity, the recording time will be reduced
accordingly.
z The recording rate will be limited between A 10.00/
20.00 and 0.50/1.00 FPS when the setting for pre-alarm
recording is “ON”.
z The recording rate for timer recording should be set
separately using the TIMER SET menu. (JP. 104)
5 Click [SAVE].
The new setting is saved.
6. NORMAL REC MODE SET
Setting the picture quality for recording
Setting Description
SUPER FINE Super Fine
FINE Fine
ENHANCED Enhanced
NORMAL Normal
BASIC Basic
Setting Description
FIELD
Sets the recording method to field. This is the
normal recording method.
FRAME
Sets the recording method to frame. This
method is used when the resolution of
still-type images must be improved. Note,
however, that this method is not suitable for
fast-moving images as they can become
blurred.
1
2
3
4
5
Setting audio recording
Setting Description
ON Audio will be recorded.
OFF Audio will not be recorded.
Setting the recording rate
e00_l8had_us_7.book Page 103 Wednesday, March 10, 2004 2:47 PM