Filter
Top Products
MENU-SPECIFIC SETTINGS2
110 English
NETWORK
SETTINGS
(when optional interface board is installed)
Network settings must be made in advance on the unit
whenever it is to be controlled via a network. Once this has
been done, settings can then be changed from the
controlling PC.
z Changing network-related settings
When these settings are modified, connection will be
canceled and control rights will be returned to the unit.
To restore the connection, repeat network settings on
the PC to match the modified unit settings.
1 Change the settings as required.
z If a value other than “80” is set as the default value for
the port, when specifying the URL, enter a colon (:) and
then the port number after the IP address.
For example, if the port number was set as “81”, you
should enter
http://192.168.0.1:81/
(5) PASSWORD SETTING
This item allows you to set a password for each different
user level.
z Use between 4 and 8 alphanumeric characters for
passwords.
(6) NETWORK SPEED
This item lets you modify the network speed setting.
NO LIMIT, 64, 128, 256, 512, or 1024 kbps
When the unit is reset, the network speed setting will revert
to the default value (i.e., NO LIMIT).
2 Click [SAVE].
The network settings or modifications are saved.
13. NETWORK SET
Item Description
(1) IP ADDRESS
Allows the unit’s IP address to be
modified.
(2) SUBNET MASK
Allows the unit’s subnet mask to be
modified.
(3) GATEWAY Allows the unit’s gateway to be modified.
(4) PORT
Allows the unit’s port number to be
modified. Set within the range of 1 to
65535. (default setting: 80)
(1)
(2)
(3)
(4)
(5)
(6)
2
User level 123
User name ID1 ID2 ID3
Usable
menus
Monitoring of live images
Monitoring and searching
of recorded images
Starting and stopping of
recording; timer recording;
modification of unit
settings, etc.
Password (default setting) 1111 2222 3333
e00_l8had_us_7.book Page 110 Wednesday, March 10, 2004 2:47 PM