Filter
Top Products
MENU-SPECIFIC SETTINGS2
English 109
(when optional interface board is installed)
This screen displays settings relevant to the unit’s
interfaces.
z It will not be possible to modify settings: The screen
displays data for confirmation purposes only.
Set a warning buzzer to sound for alarms or when the hard
disk space reaches zero as described below.
1 Select “ON” or “OFF” for the alarm
buzzer.
z To sound a buzzer on the PC
Create a folder named BUZZER in the PC’s root
directory, and save the sound file to use as the buzzer
tone as C:\BUZZER\BUZZER.WAV.
When a PC-monitored DVR generates an alarm, the PC
also sounds a buzzer, using the saved sound file.
2 Click [SAVE].
The new settings are saved.
11. RS-232C/RS-485 SET
(1)
(2)
(3)
(4)
(5)
Item Overview Setting Description
(1) CONTROL
Displays the type if interface being
used for control of the unit.
RS-232C When RS-232C is being used.
RS-485 When RS-485 is being used.
(2) DATA SPEED
Displays the RS-232C or RS-485
communication speed.
2400/4800/9600/
19200 (bps)
(3) STATUS INFO
Displays whether or not status
information will be transmitted
during RS-485 communication.
ON Status information will be transmitted.
OFF Status information will not be transmitted.
(4) ALARM INFO
Displays whether or not alarm
information will be transmitted
during RS-485 communication.
ON Alarm information will be transmitted.
OFF Alarm information will not be transmitted.
(5) ADDRESS
Displays the address when RS-485
has been selected.
0 to 127 Set within the range of 0 to 127.
12. BUZZER SET
(1)
(2)
2
(3)
(4)
(5)
(6)
Item Default setting Description
(1) ALARM OFF Sounds a buzzer when an alarm is detected.
(2) DISK FULL ON
Sounds a buzzer when the amount of data stored in each of the hard disk’s recording areas has
reached the remaining-space warning level. (JP. 102)
(3) DISK ERROR ON Sounds a buzzer when a hard-disk error occurs.
(4)
LOCK
WARNING
ON
Sounds a buzzer when an operation button not permitted for the current user level is pressed while
the security lock is set. Specifically, the buzzer sounds twice with an interval of approximately 0.5
seconds.
(5) KEY IN OFF The buzzer emits a key-operation sound each time a button is pressed.
(6) NON REC OFF Sounds a buzzer when recording is stopped.
e00_l8had_us_7.book Page 109 Wednesday, March 10, 2004 2:47 PM