Filter
Top Products
English 13
3 NAMES AND FUNCTIONS OF PARTS
Front panel
1. [STILL] button
Pauses the screen image when pressed during playback.
Pressing the button again restarts playback.
2. [PLAY/STOP] button and indicator
Plays back the normal image (indicator lights). When
pressed during playback, stops playback.
3. [REC/STOP] button and indicator
Starts normal recording. Indicator lights during recording.
During recording, pressing the button for at least 2
seconds stops recording and turns off the indicator.
4. [COPY] button (JP. 36)
Copies images to the hard disk’s archive area, to a
CompactFlash card, or to a Microdrive.
5. Removable HDD tray
6. HDD indicator
Lights up to indicate that data transfer between the unit
and HDD is enabled.
7. Tray release key
Turns power supply to the HDD ON and OFF. When the
key is turned clockwise, the HDD indicator will light up
indicating the ON condition. When OFF, the tray can be
removed. See caution for the key operation. (JP. 11)
8. HDD access indicator
Lights up to indicate the reading or writing of data.
9. [CHANGE DISK] button and indicator (JP. 18)
The red indicator lights when the power is turned ON.
When this button is held down for 2 seconds, the green
indicator flashes then lights, and the HDD can be
removed. If an HDD or fan error occurs, the red indicator
flashes.
10. [TIMER] button (JP. 23)
When pressed while recording is stopped, the unit enters
timer record standby. When the set time arrives, the digital
video recorder starts timer recording.
11. [ALARM] button (JP. 30)
When the [ ] or [ ] button is pressed during
playback, the unit skips to the next earlier or later alarm.
12. [SEARCH] button (
JP. 29)
z When the button is pressed while recording or stopped,
the search setting screen is displayed.
z When the button is pressed during the playback of
frame-recorded images, the playback mode is toggled
between Frame and Field.
13. [MENU] button
Used to display the menu screens.
[CHANNEL] button (JP. 28)
When a multiplexer capable of decoding channel
information (i.e., camera numbers) is connected to the
unit, a channel can be specified for single-channel
playback using this button.
14. [MENU RESET] button (JP. 43)
Used to initialize the currently displayed sub-menu
settings.
In addition, this button can also be pressed while the
normal screen is displayed to make time adjustments.
15. [REVIEW/CLEAR] button (JP. 26)
When pressed during playback, lets you fast-rewind the
image while watching it on-screen. When pressed while
the image is still, reverse playback is performed. Also used
for menu screen operations.
16. [ ] button
Used to move the cursor in menu screens down. Also used
to change setting values.
Used for frame advance (reverse) and adjusting the CUE/
REVIEW speed. Also used to set the security lock.
12 659
11 13 14 20 21 22191712
181516 23 24
3
78
10
4
e00_l8had_us_7.book Page 13 Wednesday, March 10, 2004 2:47 PM