Filter
Top Products
INTERFACE SPECIFICATIONS1
84 English
(when optional interface board is installed)
INTERFACE
SPECIFICATIONS
CLOCK ADJUST (E0H)
z If sent with the recorder stopped, resets the minutes
and seconds of the clock display to 00. For example,
if sent between 13:30:00 and 14:29:59, sets the
clock to 14:00:00.
MENU (74H)
z If sent with the recorder stopped, displays the main
menu.
z If sent with a sub-menu displayed, toggles the menu
screen each time it is sent.
/CLEAR (53H)
z If sent while a menu screen is displayed, sets the
setting item selection or value.
z If sent while the main menu is displayed, switches to
the selected sub-menu.
z If sent while a data display is on screen, moves the
display to the left. No operation is performed if sent
during recording.
z Starts rewinding.
z If sent during playback, starts rewind playback.
z If sent during still mode, rewinds the image by one
frame (field).
/ENTER (63H)
z If sent while a menu screen is displayed, sets the
setting item selection or value.
z If sent while the main menu is displayed, switches to
the selected sub-menu.
z If sent while a data display is on screen, moves the
display to the right. No operation is performed if sent
during recording.
z Starts fast-forwarding.
z If sent during playback, starts fast-forward playback.
z If sent during still mode, advances the image by one
frame (field).
SHIFT +/ (65H)
z If sent while a menu screen is displayed, selects the
setting item, changes the setting, or changes
(increases) the set value.
SHIFT -/ (66H)
z If sent while a menu screen is displayed, selects the
setting item, changes the setting, or changes
(decreases) the set value.
OSD/EXIT (8EH)
z If sent while the main menu or a sub-menu is
displayed, exits menu settings.
z If sent during recording or playback, changes/hides
the operation display position.
MENU RESET (E1H)
z If a menu screen is displayed, resets (initializes) that
menu’s settings.
When a command for acquiring information is sent, the
recorder returns the information (data) for the command.
STATUS SENSE (D7H)
z Returns the recorder’s operating status in 5 bytes.
(JP. 85)
ACK (0AH)
z Returned when the recorder received a valid
command.
NAK (0BH)
z Returned when the recorder received an undefined
(or non-functional) command.
T/D SEARCH (B5H) for RS-232C only
z Enter year, month, date, hour, minute, then run T/D
SEARCH with (40H).
Commands for setting the recorder
On-screen commands
Commands for acquiring information
Return codes
RXD
TXD
D7
RXD
TXD
0A
RXD
TXD
0B
e00_l8had_us_7.book Page 84 Wednesday, March 10, 2004 2:47 PM