Filter
Top Products
WATCHING IMAGES2
114 English
NETWORK
OPERATION
(when optional interface board is installed)
When using multiple cameras and a multiplexer that can
decode channel information (camera Nos.), you can
specify the channel No. of the monitoring camera for
monitor display.
Select the channel.
Specify a channel to be viewed. The image from the
specified channel will be displayed.
In addition, the corresponding channel number will be
displayed in the “CHANNEL” box.
Click the button.
During playback, click the or
button.
The playback speed will increase or decrease by one level
accordingly.
Click the button.
During reverse playback, click the or
button.
The reverse playback speed will increase or decrease by
one level accordingly.
During playback, click the button.
Playback will be paused on the current image.
To return to normal play mode, click the button while
playback is paused.
While playback is paused, click the or
button.
The paused image will frame advance (forward/reverse)
accordingly.
During playback, click the or
button.
The previous or next alarm image is displayed accordingly.
Specifying the channel (camera
number)
Channel
selection
Performing operations in play mode
Playback
Adjusting the playback speed
Reverse playback
Adjusting the reverse playback speed
Still image
Frame advance (forward/reverse)
Alarm skip
e00_l8had_us_7.book Page 114 Wednesday, March 10, 2004 2:47 PM