Filter
Top Products
LANGUAGE/CLOCK SET1
50 English
SETTINGS <MAIN MENU 1>
You can set the date/time at which the time is switched
from standard time to daylight savings time, and the date/
time at which the time is switched back again.
The example below is the default value.
Example:
After the clock display reaches April 4, 2004, 01:59, the
next clock display is 03:00, putting the clock an hour
ahead (summer time).
After the clock display reaches October 31, 2004,
01:59, the next clock display is 01:00, putting the clock
an hour behind (back to standard time).
(1) Sets the week for switching to daylight savings time.
(2) Sets the day of the week.
(3) Sets the month.
(4) Sets the time.
(5) Sets the week for ending daylight savings time.
(6) Sets the day of the week.
(7) Sets the month.
(8) Sets the time.
7 Press the [ ] button.
“1ST” flashes.
8 Press the [ ] or [ ] button to select
the desired week, then press the [ ]
button.
The cursor moves to the day of the week.
9 Press the [ ] or [ ] button to select
the desired day of the week, then press
the [ ] button.
The cursor moves to the month.
10 Press the [ ] or [ ] button to select
the desired month, then press the [ ]
button.
The cursor moves to the time.
11 Press the [ ] or [ ] button to select
the desired time, then press the [ ]
button.
The cursor moves to the minutes portion of the time. Set
the desired minutes in the same manner.
Use the same procedure when setting the time at which
daylight savings time is to end. The <DAYLIGHT
SAVING> settings are now finished.
This section describes how to have the time synchronized
automatically when two or more digital video recorders are
connected. When “ADJUST. TIME” is set, all connected
devices are adjusted every day to the time that has been
set on the first device (to the nearest second).
(Default setting: 01:00)
1 Use a cable to connect the CLOCK OUT
terminal on the rear panel of one digital
video recorder to the CLOCK IN terminal
on the second digital video recorder.
z Do not use a loop connection.
2 Press the [ ] or [ ] button to move
the cursor to “ADJUST. TIME”.
When “USE” is selected for <DAYLIGHT
SAVING>
(1) (2) (3) (4)
(5) (6) (7) (8)
<EXT. CLOCK SET> settings
1st DVR
2nd DVR
To 3rd DVR
CLOCK
CLOCK
IN OUTCOM
COM CLOCK IN
IN OUTCOM
e00_l8had_us_7.book Page 50 Wednesday, March 10, 2004 2:47 PM