Filter
Top Products
NAMES AND FUNCTIONS OF PARTS3
14 English
INTRODUCTION
17. [ ] button
Used to move the cursor in menu screens up. Also used to
change setting values.
Used for frame advance (forward) and adjusting the CUE/
REVIEW speed.
18. [CUE/ENTER] button
When pressed during playback, lets you fast-forward the
image while watching it on-screen. When pressed while
the image is still, forward playback is performed. Also used
for menu screen operations.
19. [EXIT/OSD] button (JP. 20)
z Returns the display to the normal screen when the main
menu, a sub-menu, or a setting screen is displayed.
z If pressed repeatedly during recording or playback, the
operation display can be moved or hidden.
20. TIMER indicator (JP. 23)
The indicator lights when the unit enters timer record
standby.
21. FULL indicator (JP. 23)
The indicator begins to flash when the remaining available
memory in the hard disk’s normal recording area reaches
the setting value.
When the recording area becomes full, this indicator turns
on and recording will be stopped.
22. ALARM FULL indicator (JP. 57)
The indicator begins to flash when the remaining available
memory in the hard disk’s alarm recording area reaches
the setting value.
When the recording area becomes full, this indicator turns
on and recording will be stopped.
23. ALARM indicator
Flashes when recording an alarm image. Indicator lights
during pre-alarm recording.
24. CompactFlash card slot (
JP. 38)
Used to insert a CompactFlash card or Microdrive.
e00_l8had_us_7.book Page 14 Wednesday, March 10, 2004 2:47 PM