Filter
Top Products
16 Micro Motion 7829 Viscomaster
®
and Viscomaster Dynamic
™
Viscosity Meters
Installation
2.4.5 VAF Viscotherm retrofit
Conditions:
• Temperature: -50 to +200°C (–58 °F to 392 °F)
• Flow: 40 to 330 l/min (2.5 to 20 m
3
/hr) (11 to 87 US gal/min)
• Viscosity limit: Up to 100 cSt
• Pressure: As defined by process flanges
• Calibration boundary: 2–½” Schedule 40
This retro-fit kit has been specifically designed to provide a simple, direct replacement for existing
capillary viscometers. Typically, these viscometers are designed to operate with their own
measurement chamber, to which this adapter will be attached. No pipework changes are necessary.
Typical dimensions are shown in Figure 2-3.
Note: The schematic shown may vary without notice, although overall dimensions will remain
unchanged.