IBM RS/6000 7043 43P Home Theater Server User Manual


 
Firmware Update
This selection allows you to update the firmware in your system unit from an image
on a 3.5 inch diskette.
In order to create a firmware diskette with the latest level of firmware available, see:
http://www.rs6.ibm.com/support/micro
When prompted, insert the firmware update diskette containing the new firmware
image.
ATTENTION: While the new firmware image is being copied into your system unit,
you must not turn off the system unit. Turning off the system unit during the update
process may render your system unit inoperable.
After the firmware update is complete, shut down and restart the system unit.
If the firmware update does not complete successfully or the system unit does not
restart after the firmware update, contact your IBM authorized reseller or IBM
marketing representative.
7-24 7043 43P Series Service Guide