Filter
Top Products
After choosing which adapter to use to ping the remote system, you must provide the
addresses needed to communicate with the remote system.
Ping
1. Client IP Address [129.132.4.2]
2. Server IP Address [129.132.4.1]
3. Gateway IP Address [129.132.4.3]
4. Subnet Mask [255.255.255.]
.---------. .------.
|E=Execute| |X=Exit|
---------' ------'
===>
Change SCSI ID
This option allows you to view and change the addresses of the SCSI controllers
attached to you computer.
Update System Firmware
This option allows you to update your system firmware. Note that you must insert a
diskette containing the firmware update image after you see the following
confirmation screen.
In order to create a firmware diskette with the latest level of firmware available, see:
http://www.rs6.ibm.com/support/micro
When prompted, insert the firmware update diskette containing the new firmware
image.
Chapter 7. System Management Services 7-41