Filter
Top Products
Front Panel
01-0870-401B 01/03 19
A space can be entered by either a single press of the “0” key. For example, to
enter the words LA Default the following keys would be pressed:
■ 555 selects L
■ 2selects A
■ 0 selects space
■ 3selects D
■ → advances the cursor so the next letter can be selected
■ 33 selects E
■ → advances the cursor so the next letter can be selected
■ 333 selects F
■ 2selects A
■ 88 selects U
■ 555 selects L
■ 8selects T
■ Enter to issue the command
Issuing Commands To issue a command from the front panel, perform the following steps:
1. Navigate to the required command or parameter using the Next and Selection
buttons.
2. Select the parameter to be modified. The parameter and its option will begin
to flash.
3. Change the parameter option as required:
❒ If the available options appear in a list, scroll through the list using the
Up, Down, or Select buttons.
❒ If the option requires a numeric value to be entered, enter the value using
either the Up and Down buttons to increment the value or using the
numeric keypad to type in the value.
4. Issue the command by pressing the Enter key. An asterisk will briefly display
and then disappear when the system is finished processing the request. The
parameter, with its updated value, is then displayed and does not flash.
❒ If the Enter button is not pressed, the parameter is not changed.
❒ While the TDR6 is reconfiguring the parameter to the new value, the front
panel is temporarily disabled.
The TDR6 configuration files are stored in non-volatile memory. When the TDR6
configuration is changed using the front panel, the changes are automatically
stored in non-volatile memory. The TDR6 automatically restores to the saved
configuration whenever the unit is reset or powered up.
Correcting Mistakes Selecting Options from a List If you are selecting a parameter from a list, and
have not pressed the Enter button, use the Up or Down buttons to scroll to the
correct option.
Using the Keypad If you are entering a value with the keypad, and you have
not pressed the Enter button, you can either:
■ Press the Up button to change the value to 0, then enter the correct value
■ Press the Down button to delete the numbers (from right to left), then enter the
correct value
NOTE