Filter
Top Products
30 01-0870-401B 01/03
Front Panel
Unlocking the Front Panel
To unlock the front panel:
1. From the DTV Receiver/Decoder menu, select Control. The Control menu
displays.
2. Select FP_Lock. The Front Panel Access menu displays showing the status of
the front panel: Password = 0.
3. Using the front panel keypad, type in the password and press Enter. The
default password is 7384.
4. The front panel displays State = Unlocked indicating that the front
panel is now unlocked.
If the wrong password is entered, the TDR6 displays Password = 0. If this
occurs, use the front panel keypad to type in the correct password and press Enter.
Setting the Date
To set the date:
1. From the DTV Receiver/Decoder menu, select Control. The Control menu
displays.
2. Select Clock>Date.
3. Use the keypad to type in the correct date, separating each category with a
decimal point. The date is entered in mm/dd/yyyy format.
4. Press the Enter button.
If the date is entered incorrectly, or an out-of-range value is entered, the TDR6
will display and continue to use the previously set date.
Setting the Time
The hours are in a 24-hour format and must be set from 00 to 23, where 00 is
midnight and 23 is 11 PM. For example, for 8 AM you would set the hours to 08,
and for 8 PM you would set the hours to 20. Both minutes and seconds can be set
from 00 to 59. To set the time:
1. From the DTV Receiver/Decoder menu, select Control. The Control menu
displays.
2. Select Clock>Time.
3. Use the keypad to type in the correct hour, minutes, and seconds, separating
each category with a period.
4. Press Enter.
Performing a System Reset
To reset the TDR6:
1. From the DTV Receiver/Decoder menu, select Control. The Control menu
displays.
2. Select Reset and press Enter. The TDR6 is reset to the last configuration set;
all programmable logic and firmware is reloaded; the unit is restarted; and the
fault history log is cleared