Filter
Top Products
48 01-0870-401B 01/03
Configuring the TDR6
The Default Configuration menu displays. The configuration option that
appears on the LCD, in this example Default1, is the current TDR6
configuration.
If the LCD initially displays Config = DVB, the TDR6 was initialized to
the default DVB-compliant configuration. However, some or all of the
parameters may have been manually changed since the unit was initialized.
To ensure that all of the TDR6 parameters are set to the default DVB
configuration, continue with the next step.
3. Scroll to and select the
DVB parameter. The option begins to flash.
4. Press the Enter button. The TDR6 reconfigures the system to the DVB
defaults.
5. When the DVT Receiver/Decoder main menu displays, the TDR6 is set to the
default DVB configuration.
To initialize the TDR6 to the DVB-compliant configuration using a remote unit:
1. Issue the command
MC DEFAULT RESTORE DVB.
2. Ensure that the baud rate setting for your remote device communications
package is set to 38400 bps.
If the remote unit is set to communicate with the TDR6 at a baud rate other than 38400 bps, the
remote unit will not be able to communicate with the TDR6 after the defaults have been set. To
resolve this issue, the equivalent parameter in the software settings of the remote unit must be
changed to 38400 bps.
However, the remote unit software settings must not be changed before issuing the MC Default
Restore command to the TDR6, as the remote unit will not be able to communicate with the TDR6.
Selecting a Service
The TDR6 automatically selects the first service in the transport stream. You may
need to select another service. To select a service using the front panel:
1. From the Details menu select Service>Number. The LCD displays the current
service.
2. Select the service, which begins to flash.
3. Scroll through the list of services until the required service is displayed.
4. Press the Enter button.
To select a service using the remote unit issue the command
DC PROG #, where
# is the number of the required service.
Default Config. Menu
Config = Default1 ---->
Default Configuration Menu
Config = DVB ---->
Initializing . . .
NOTE