Filter
Top Products
iv 01-0870-401B 01/03
Preface
Issuing Commands
Tasks and examples are presented in a series of step-by-step instructions.
Commands or information that you enter into the system appear in a different
type, as shown in the following example:
To restore the factory default1 configuration, select
config>default>restore>default1
from the front panel, or issue the
remote command
mc default restore default1.
If the command contains variable information that is to be typed into the system,
the variable information is found within karats < >. In the following example, you
would type the command
mc default restore then the correct value for
<string>
: Type mc default restore <string>
Front Panel Navigation
This guide uses right angle brackets (>) to indicate a sequence of menus,
submenus, and menu items.
For example, select
Control>Clock>Date>June 03, 2003 means:
■ From the control menu, select clock.
■ From the clock menu, select date.
■ At the date option, enter the date, June 03, 2003, in the correct format.
Displays
The system may return values and messages on a front panel LCD, remote
terminal, or both. In this guide these values and messages appear in a different
type:
date = 06/23/2003
Revision History This guide is periodically updated and revised. For documentation updates, call
Tiernan Customer Service.
Customer Service We hope this guide provides all the information and instructions you need to
operate the TDR6. However, if you need assistance, contact Tiernan Customer
Service at our corporate headquarters, located in the United States, through any of
the following methods:
■ Phone 858.657.5454, Monday – Friday,
7:30 a.m. – 6:00 p.m. pacific standard time
■ Fax 858.657.5455
■ Email support@tiernan.com
■ After-hours Emergency Customer Service Paging: 858.657.5454, option 5
Leave a detailed voice message and your call will be returned.
Revision Date Type of Revision
A 01/2002 Initial release. Corresponds to code version 2.53.
B 01/2003 Updated manual to include information and front panel
and remote commands that support implementation of
VBI 4:2:2 expanded windows and BISS features.
Updated and added front panel and remote commands
relating to auto select functionality (service, audio, and
user data), video chroma, audio data and sample rates,
BER, and signal levels. Removed the video Secam
command. This manual corresponds to code version
3.20.