Filter
Top Products
Using a Remote Unit
01-0870-401B 01/03 41
DMD.
x
RF 0 to 15000 MHz 11210 Sets an internal representation of the frequency of the
modulated signal before external down conversion. This will
generally be the frequency of the signal coming from the
satellite. This number is used to calculate the incoming
frequency. The incoming frequency is the difference
between the local oscillator frequency and the radio
frequency.
Front panel equivalent:
Details>Input>Config>Demod>RF>RF Frequency
DMD
.
x
ROLLOFF 35RCRO, 25RCRO 35RCRO Sets the percentage, 35% or 25%, of excess bandwidth
available for other data.
Note: This parameter is only valid when DMD
.x MOD is set
to either 8PSK or 16QAM.
Front panel equivalent:
Details>Input>Config>Demod>RF>Rolloff
DMD
.
x
SR 1000000 to 37500000
sps
— Sets the value for the incoming modulated signal symbol
rate (in sps).
Front panel equivalent:
Details>Input>Config>Demod>RF>Sym Rate
DMD
.
x
TUNE 950 to 2150 MHz 1210 Sets the carrier frequency of the incoming L-band
modulated signal. This can be set explicitly or can be
calculated as the difference between the down converter’s
local oscillator frequency and the radio frequency.
Front panel equivalent: None
FAULTLOGCLEAR — — Clears the fault log.
Front panel Equivalent: Faults>Clear
FC — — Query-only; displays current faults.
Front panel Equivalent: Faults>Current
FH — — Query-only; displays the fault history.
All faults in the fault history log are date and time stamped.
Front panel Equivalent: Faults>History
HDVD — — When HDVD is entered, the TDR6 returns the following
information for HD video: format, frame rate, PID, and delay
setting
Front panel equivalent: None
HDVD CHROMA n/a, 4_2_0, 4_2_2,
4_4_4
— Query-only; displays the video chroma format for the
HD
input transport stream.
HDVD DELAY -1000 to 1000 0 Allows you to set the delay between the time the high-
definition video data is received and the time the video data
is sent to the video output port to compensate for the
clocking of the video encoder.
To align the audio with the video, enter 0 for no delay.
Front panel equivalent: Details>Video>Slot_
x
>HD
Vid>Delay
HDVD FORMAT 1080i, 720p 720p Sets the high-definition video format, auto-selected by the
TDR6. Supported formats are 1080I and 720P.
Front panel equivalent: Details>Video>Slot_
x
>HD
Vid>Format
HDVD FRATE 25, 29.97, 30, 59.94, 60 59.94 Sets the frame rate for high-definition video.
Front panel equivalent: Details>Video>Slot_
x
>HD
Vid>Frame Rate
HDVD PID <available PIDs> or OFF 33 Selects a specific high-definition video PID from those
currently available.
When no video is present, the system returns the message
no video present
.
To query all available HD video PIDs, enter the command
HDVD
x
PID ?
Front panel equivalent: Details>Video>Slot_
x
>HD Vid>PID
TDR6 Remote Command Listing (continued)
Mnemonics
Parameters/
Response Values
DVB Defaults Description