Filter
Top Products
98
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Basic operations (continued)
Basic playback
This function is used to playback recorded data. This unit
allows recorded data to be played back using various meth-
ods. The basic playback described below is the most com-
mon method for playback.
step1. Press the PLAY button inside of the front door.
• Playback starts.
• After turning the power on, the oldest recording
data is played back first. Otherwise, playback
resumes at the stopped position of the previous
playback spot.
STOP
PAUSE
REV. PLAY
PLAY
JUMP TO END SPEED
• When the “Playback Device Repeat Setting” (System
Menu Memory Recording Data Readout Setting)
is set to “Repeat Off,” playback stops when reaching
the physical end of the HDD or end point of the recording
section. When the “Playback Device Repeat Setting”
is set to “Repeat On,” recorded data is played back
repeatedly. ( See page 83.)
(To change the playback device:)
step2
-1
. Select the playback device and playback area in the
<Select Source Device> (User Menu Search Select
Source Device).
Main: Plays back the contents from the main HDD
device.
Normal: Normal recording area
Alarm: Alarm recording area
LPA: Long pre-alarm recording area
Copy 1: Plays back the recorded contents of the
copy 1 device.
“SerialBus,” “NAS,” “SCSI,” “DVD/CD,”
“USBMemory”
Copy 2: Plays back the recorded contents of the
copy 2 device.
“SerialBus,” “NAS,” “SCSI,” “DVD/CD”
•“Alarm” appears when “Alarm Recording Area”
(System Menu Memory Data Management Setting
for Main Memory Change Partition Setting) is set to
other than “0 %.”
•“LPA” appears when “Long Pre-Alarm Area” (System
Menu
Memory Data Management Setting for Main
Memory Change Partition Setting) is set to other than
“0 %.”
step2
-2
. Press the PLAY button.
• Playback of the selected device starts.
• When you press the PAUSE/JUMP TO END button
during the playback is stopped, the still frame playback
picture around the end point of the latest recording is
displayed.
step3. To pause playback, press the PAUSE button.
• To resume playback, press the PAUSE button
again or press the PLAY button.
step4. To stop playback, press the STOP button.
• When executing playback again, the playback
starts from the stopped position of the previous
playback.
• Pressing the OUTPUT A/B button on the front panel
switches the multiplexer video output. When OUTPUT
A is selected, the button light indicator is off. When
OUTPUT B is selected, the button light indicator is
on, and the buttons related to playback function are
operated for the monitor screen connected to the
OUTPUT B connector. Pressing the OUTPUT A/B
button again switches the multiplexer output to
OUTPUT A.
• The playback of each camera may vary in speed
depending on the recorded condition.
• During the split screen display, the playback speed
may be slower than the speed used for recording.
• When playing back on both OUTPUT A and B, the
playback speed may be affected and become slower.