Filter
Top Products
99
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic operations
Basic search
This function is used to search the start point of needed
picture. This unit is equipped with 5 search functions
(Search by Time and Date, Search by Alarm List, Find data
storage location, Search by Book Mark, and Search by
Motion). In this section, the common search methods,
search by time and date and search by alarm list, are de-
scribed.
Search by Time and Date
This item is used to search recording picture by specifying
date, hour, minute, second, and camera number. The
search result is displayed in still frame playback. When
searching for 1 camera number, the search result is dis-
played in the single screen display. When searching for 2
or more camera numbers, it is displayed in SPLIT16 screen.
Search by Time and Date
2
User Menu
Search
1
step1. To input the time and date to be searched manually,
select “Manual” and then set the month, date, year,
hour, minute, and second.
• To input the start and end points of recording,
select “Start” and “End” respectively.
step2. Set the camera numbers to be searched.
step3. Select “Search.”
step4. To playback the searched picture, press either the
PLAY button or the PAUSE button.
step5. To stop playback or still frame playback, press the
STOP button.
• To change the source device to be searched, set the
desired device in the <Select Source Device> (User
Menu Search Select Source Device). ( See page
42.)
• To display the single screen display of the desired
camera number when the search result is displayed
in the SPLIT16 screen, press the desired camera
number button.
• When there is no recording of the set time, the picture
of the closest time and date for the set camera number
is displayed in still frame.
• When the multiple recorded data of the same date
and time are existed, execute search by time and date
more than once until the desired picture is searched.
• Depending on the recording condition, search by time
and date function may not operate correctly.
• When you change the display from single to split or
from split to single during still frame playback, the
recording picture may not be existed at that point or
picture may not be displayed depending on the
selected camera number or timing of displaying the
still frame playback picture.