Filter
Top Products
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
14
AUDIO OUT
22 24 29 30
31
32
25 26
27
28
3323
22. POWER button
Turns on the unit (MAIN switch on the rear of this
unit must be ON). When the button is pressed again,
the unit switches to stand-by mode. The POWER
and other button operation are not accepted while
the POWER indicator is flashing.
23. ANALOGUE OUTPUT connectors
VIDEO OUT connector
Output connector for video signal (RCA pin).
AUDIO OUT connector
Output connector for audio signal (RCA pin).
24. SERIAL BUS port
Input and output port for the devices equipped with
SERIAL BUS connectors.
25. HELP button
Displays the help menu (for caution on use, operat-
ing method, and explanation on functions).
Used when the warning message is displayed.
This button can be used even while the menu screen
is displayed.
26. SET UP button
Displays the <User Menu>.
27. SEARCH button
Displays the <User Menu> with search menu
opened.
28. TIMER button
Sets the unit to timer recording/stand-by mode and
lights up the TIMER indicator. When pressing this
button for more than 2 seconds, timer recording/
stand-by mode is cancelled and the TIMER indicator
turns off.
29. LOCK button
Activates simple lock or password lock when pressing
while the MAIN switch (main power) on the rear panel
is turned on and lights up the LOCK indicator. Moreo-
ver, the PASSWORD can be set on the <Password
Setting> (Setup Menu System Password Setting).
30. TRIPLEX PB button
In split screen display, inserts the playback picture
of needed camera while also displaying the live pic-
ture from other camera.
31. BOOK MARK button
When pressing this button during frame still play-
back of the single screen display, the selection
screen appears and you can memorize the book
mark or copy the picture being displayed.
32. DIGITAL ZOOM button
Pressing this button in single screen display dis-
plays the screen in 100 % magnification (live or play-
back). Pressing the camera number button (11, 14,
15, or 16) moves the magnification centre point.
33. Operation buttons
STOP button
Stops playback.
PAUSE/JUMP TO END button
Switches the playback to still frame playback when
pressing this button during playback. Resumes
playback when pressing this button again. The
button lights up during still frame playback.
When pressed during shuttle playback, the set play-
back speed is maintained even when letting go of
the SHUTTLE ring. (Shuttle hold)
When pressed during the unit is in stop mode of
playback, the frame still picture around the end point
of the latest recording appears. (Jump to end)
REV. PLAY (REVERSE PLAY) button
Starts reverse playback. The button lights up during
reverse playback.
PLAY button
Starts playback. The button lights up during
playback.
SPEED (+ and –) button
Switches the playback interval speed during nor-
mal or reverse playback.
Major operations and their functions (continued)
Front view (inside of the door)