Filter
Top Products
72
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Menu Data Setup Menu
This menu is used to update and save the menu settings
of this unit. This is done by loading the menu settings
which is copied from another DX-TL5000U via the
external media such as USB memory, the DVD disc, or
CD available for this unit.
• During loading or saving the menu data, other
operations are not accepted.
Load Menu Data
This item is used to update the menu settings of this unit
by loading the menu settings copied on the external media.
• To load or change the menu settings stored on the
external media, set the HDD settings (Alarm area,
alarm area capacity, LPA, and LPA area capacity) of
this unit to the same settings as the recorder which
has been used for copying the menu settings. When
these settings are different between this unit and the
recorder which has been used for copying, the menu
settings cannot be updated.
• The menu setting cannot be updated by using the
menu data of which the format is different. (For
example, the construction of the menu has been
changed due to the addition of the function, etc.)
Setup Menu
Menu Data
Load Menu Data
Load Menu Device Selection
5
1
1
step
3
steps
1, 2
step1.
Select the device and the group to be used for loading
the menu settings.
step2.
Select “Eject” to eject the device.
• “Eject” appears only when the device selected
on step 1 can be ejected.
step3.
Select “Execute.”
• The menu settings of this unit is updated and
“Menu setting data is loaded.” appears on the
screen.
• When the medium to be used for loading the
menu is not prepared, “Device does not exist.”
appears on the screen.
• When loading the data with the setting of “IP Address,”
“Sub Net Mask,” “Gateway,” “Service Port Setting” of
LAN B, “IP Address,” “Sub Net Mask,” “Gateway” of
LAN A, or menu language selection changed, the
power turns off automatically. Then this unit restarts.
• The time is not adjusted when the menu loading is
completed. Adjust the time setting.
Save Menu Data
This item is used to save the menu settings of this unit to
the external device.
Setup Menu
Menu Data
Save Menu Data
Save Menu Device Selection
5
2
1
step
3
steps
1, 2
step1. Select the device and the group to be used for saving
the menu settings of this unit.
step2.
Select “Eject” to eject the device.
• “Eject” appears only when the device selected
on step 1 can be ejected.
step3.
Select “Execute.”
• The menu settings are saved to the external
device.
• When completing saving, “Menu setting data is
saved.” appears on the screen.
• When the medium to be used for saving the menu
is not prepared, “Device does not exist.” appears
on the screen.
• Loading and saving the menu data are available only
while the unit is in stop mode (not in playback,
recording, backup, or communication).
• Loading or saving the menu data may take a few
seconds to start after selecting “Execute.”