Filter
Top Products
43
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
Search by Motion
Picture recorded via motion detection can be searched by
specifying the motion detection conditions. For this func-
tion, the camera number and start time needs to be speci-
fied to search. The search result is displayed in frame still
playback of the single screen display.
steps
1, 2, 4
step
3
Search by Motion
Motion Detection Settings
6
B
Motion Mask Setting
A + D
User Menu
Search
1
step1. Set the camera number to be searched.
step2. Set the time for start searching.
• To search from the oldest recording point, select
“Oldest.”
• When the search start point is set to the earlier
time than the recording start point, the search is
executed from the oldest recording point.
step3. Set the motion detection conditions for playback.
• Set motion mask setting, sensitivity, and motion
threshold. See pages 58 and 59 for the details
of these settings.
• The sensitivity of motion detection conditions for
playback has two setting items, “Low” and “High.”
• The motion detection settings for recording
(Motion A or B) can be copied. To copy the settings
for recording, display the desired setting in “Same
as Recording Setting” and then select “same.”
The sensitivity setting for playback is set to “High”
when the setting for recording of “High,” “Mid
High,” or “Mid” is copied, and is set to “Low” when
the setting for recording of “Mid Low” or “Low” is
copied.
step4. Select “Search.”