Filter
Top Products
78
RQT6035
Home Theater
VIDEO
VIDEO
OPTICAL
R L
AUDIO
(L1)
(L3)
AC IN
T
OUT1 OUT2 IN1 IN3
(PCM/BITSTREAM)
DIGITAL AUDIO OUT
R L
AUDIO
R L
AUDIO
R L
AUDIO
S-VIDEO
S-VIDEO
VIDEO
S-VIDEO
VIDEO
S-VIDEO
OPTICAL
AC IN
T
OUT1 OUT2 IN1 IN3
(PCM/BITSTREAM)
DIGITAL AUDIO OUT
»
B
Connecting to a digital
amplifier or system
component
Rear of this unit
Expanding your home theater system
Insert fully, with this side facing
up. (Do not bend when
connecting.)
º To enjoy Dolby Pro Logic (➡ page 96)
You will also need to connect center and surround speakers in addi-
tion to the front speakers to enjoy surround sound. Read the instruc-
tions for the equipment for connection details. Turn V.S.S. off. Dolby
Pro Logic will not function correctly if V.S.S. is on.
Optical digital audio cable
(not included)
To optical digital input
Amplifier or
system
component (with
or without
decoders)
(not included)
Speakers
(not included)
Example:
Six speakers
For your reference
³Change the settings in the Audio ACTION menus (➡ page 83) to
suit the digital equipment you have connected.
If the equipment can decode Dolby Digital, set “Dolby Digital” to
“Bitstream” (factory setting).
If the equipment can decode DTS, set “DTS” to “Bitstream”.
³The DTS decoder must be compatible with the signals recorded on
DVD.
»
C
Connecting an analog
amplifier or system component
Rear panel of this unit
Audio cable
(not included)
Audio input (L/R)
2-channel analog amplifier or
system component
(not included)
Audio cable
Red (R)
White (L)
You can record the digital signal directly onto digital recording
equipment.
The signals on DVDs will be converted to 48 kHz/16 bit linear
PCM.
When recording DVDs, ensure the following conditions are
met.
³There is no copy guard recorded on the disc.
³The recording equipment can handle a sampling frequency
of 48 kHz/16 bit.
If you want to use the synchro recording feature on your digit-
al recording equipment and you use connection [B] or [C] to
record from CDs or video CDs, first pause at the point you
want to record from, activate the synchro feature, then restart
play on the unit.
!?
!?