Filter
Top Products
80
RQT6035
Home Theater
When you can’t directly connect
the antenna you disconnected from
your television to the unit
Check the type of antenna input on your television and make the
appropriate connection.
Expanding your home theater system
When you can’t directly connect
the included 75 coaxial cable to
the television
Use the connection that suits the type of terminal.
from the antenna
º If there is a twin lead and a coaxial cable
º If there are two twin leads
from the antenna
from the antenna
(Flat)
Twin lead
300 cable
(Round)
75 coaxial cable
300–75 transformer
(not included)
VHF/UHF band mixer
(not included)
VHF/UHF band mixer
(not included)
300–75 transformer
(not included)
To this unit’s
RF IN terminal
To this unit’s
RF IN terminal
To this unit’s
RF IN terminal
VHF/UHF band separator
(not included)
Television
º If it is a screw type terminal
75–300 transformer
(not included)
Television
75 coaxial cable
º If it is a double screw type terminal
Television
VHF/UHF band separator
(not included)
º If it is a complex TV terminal
³If your television has both post and plug-type VHF
terminals, the post connection is recommended to
minimize signal loss.
³Connect to one of the ANT terminals and select the same
antenna number on the television.
º If it is a twin lead
(Flat)
Twin lead
300 cable
(Flat)
Twin lead
300 cable
º If it is a screw & plug type terminal
VHF
UHF
VHF
or
UHF
Television
Split out
ANT 1
ANT 2
VHF
UHF