Filter
Top Products
Appendix A-17
Appendix
Item
310
Item number
Function
REC INHIBIT
[0]
1
2
3
[all]
crash
video
audio
Specifies the extent of the record inhibit function.
0 :Recording is disabled.
1 :Normal recording is disabled, but recording in assemble
or insert edit mode is possible.
2 :Recording of video and CTL signal is disabled.
3 : Recording of audio and CTL signal is disabled
Note
The REC INHIBIT indicator on the lower control panel
lights up when the setting is “1” or “2”, and flashes when an
operation prohibited by the setting is attempted.
Settable range
The follwing items specifies the allocation of each channel
for the analog audio preset of the editor or remote
controller when the digital audio signals from the VTR is
edited on an editor (BVE-600, etc.) or remote controller
with digital audio edit preset control functions.
311
0
[1]
2
3
no definition
[analogch1]
analog ch 2
analog ch 1 + ch 2
Items 311 through 315 describe the analog audio edit preset
during editing mentioned on right.
Sets the channel-1 edit preset of the VTR to ON or OFF
according to the analog audio preset specified on an editor
or remote controller.
0 : Not defined.
1 : As determined by analog channel 1 edit preset.
2 : As determined by analog channel 2 edit preset.
3 :As determined by analog channel 1 or analog channel 2
preset.
no definition
analog ch 1
[analogch2]
analog ch 1 + ch 2
0
1
[2]
3
Sets the channel-2 edit preset of the VTR to ON or OFF
according to the analog audio preset specified on an editor
or remote controller.
0 : Not defined.
1 : As determined by analog channel 1 edit preset.
2 : As determined by analog channel 2 edit preset.
3 : As determined by analog channel 1 or analog channel 2
preset.
Sets the channel-3 edit preset of the VTR to ON or OFF
according to the analog audio preset specified on an editor
or remote controller.
0 :Not defined.
1 :As determined by analog channel 1 edit preset.
2 :As determined by analog channel 2 edit preset.
3 :As determined by analog channel 1 or analog channel 2
preset.
[nodefinition]
analog ch 1
analog ch 2
analog ch 1 + ch 2
313
[0]
1
2
3
Sets the channel-4 edit preset of the VTR to ON or OFF
according to the analog audio preset specified on an editor
or remote controller.
0 :Not defined.
1 :As determined by analog channel 1 edit preset.
2 :As determined by analog channel 2 edit preset.
3 :As determined by analog channel 1 or analog channel 2
preset.
[nodefinition]
analog ch 1
analog ch 2
analog ch 1 + ch 2
314
[0]
1
2
3
ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
4
Sets the analog audio channel (longitudinal) edit preset of
the VTR to ON or OFF according to the analog audio
preset specified on an editor or remote controller.
0 :Not defined.
1 :As determined by analog channel 1 edit preset.
2 :As determined by analog channel 2 edit preset.
3 :As determined by analog channel 1 or analog ch 2
preset.
315
[nodefinition]
analog ch 1
analog ch 2
analog ch 1 + ch 2
[0]
1
2
3
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CUE
ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
1
ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
3
ANALOG AUDIO
EDIT PRESET
REPLACE FOR CH
2
312