Filter
Top Products
Appendix A-21
Appendix
Items Related to the Time Code Generator (600s)
The values enclosed in a box are factory settings.
Specifies the line the VITC signal is inserted into.
The VITC signal can be inserted in any line from line 12
through line 20.
Note
The VITC can be inserted into two position through item
601 and item 602.
Specifies the line the VITC signal is inserted into.
The VITC signal can be inserted in any line from line 9
through line 22.
Note
VITC can be inserted into two positions through the item
601 and item 602.
Specifies the line the VITC signal is inserted into.
The VITC signal can be inserted in any line from line 9
through line 22.
Note
The VITC can be inserted into two position through item
601 and item 602.
Sets the ID code.
Note
To set the ID code
Enter the ID code using the numeric buttons, then press
the SET button.
602
(DVW-A500/1
and 500/1)
601
(DVW-A500P/1
and 500P/1)
Item number Item Function
VITC POSITION
SEL-1
12
I
[16]
I
20
12 line
I
[16line]
I
20 line
Specifies the line the VITC signal is inserted into.
The VITC signal can be inserted in any line from line 12
through line 20.
Note
VITC can be inserted into two positions through item 601
and item 602.
603
12 line
I
[18line]
I
20 line
12
I
[18]
I
20
ID CODE SET
VITC POSITION
SEL-2
9.322 line
I
[21.334line]
22.335 line
9
I
[21]
22
VITC POSITION
SEL-2
602
(for DVW-
A500P/1 and
500P/1)
9 line
I
[19line]
I
22 line
VITC POSITION
SEL-1
9
I
[19]
I
22
Settable range
601
(DVW-A500/1
and 500/1)
00000000
I
FFFFFFFF
Specifies the type of signal to be regenerated when the
time code generator is in the regeneration mode (i.e., when
the [F7] (TCG MODE) button in the TC menu is set to regen
or when the unit is in automatic edit mode).
0 :Both the time code and user bit signals are regenerated.
1 :Only the time code signal is regenerated.
2 :Only the user bit signal is regenerated.
605
[0]
1
2
TCG REGEN
MODE
TC&UB
TC
UB